The freezing point of waxy crude oil is greater than 30 ℃, and it is easy to condense wax during normal temperature pipeline transportation, resulting in difficulty or even loss of fluidity of crude oil, which greatly affects the crude oil transportation. This product can change the growing process of wax crystals, disperse wax crystals and prevent wax from forming network structure, so as to reduce the freezing point and viscosity of crude oil and improve the flow performance of crude oil. It has strong adaptability to different types of crude oil, can realize normal temperature transportation, effectively reduce energy consumption of crude oil transportation.

Different amounts of ethylene oxide (EO) and propylene oxide (PO) functional groups can be added to the same chemical main chain to produce final products with different relative solubility values (RSN). Including resin alkoxy polymer, polyol / acrylic acid copolymer, polyol ether, polyol / double epoxy compound, polyglycol and ester. Various models are suitable for crude oil dehydration with different physical properties.

Anton’s associated polymer for Profile Control and Flooding has the characteristics of high salt resistance, high temperature resistance, shear resistance, micro-emulsification, dilution resistance, etc. The associated polymer is partially hydrolyzed polyacrylamide modified by amphiphilic, through hydrophobic side chain cohesion to achieve high-efficiency structural thickening, well stability, suitable for deep profile control / adjustment of thin oil reservoirs and ordinary heavy oil reservoirs flooding, which has advantages of low dosage, obviously increase in recovery factor, and gain well economic benefits.

Corrosion inhibitor AT-CI-03 is designed for circulating cooling water system, heat exchanger equipment, boiler water and circulating water softening treatment, with good corrosion inhibition effect. After playing the role of corrosion inhibition, it will not produce precipitates that are difficult to dissolve in water, which can prolong the cleaning cycle of the system, prolong the service life of boilers and circulating water equipment, and reduce the operation cost.

A safe and efficient descaling product was developed to solve the scaling problems of barium/strontium sulfate which are difficult to remove in oilfield systems. This product is composed of novel special chemical agent, co-solvent, new surfactant and dispersant, etc. Through the synergistic effect of all the components and various chemical reaction mechanisms, sulfate deposits in the system can be efficiently dissolved and removed. The product is suitable for solve the scaling problem of barium/strontium sulfate salts in various industrial l system.

Anton’s neutral Scale Dissolver is used to remove the scale deposit, which is produced in wellbore, pipeline or container due to the change of temperature, pressure and composition in the production or operation procedure of oil and gas oilfield. Compared with normal plugging removal technology, it has advantages of low corrosion rate, little damage to facilities or equipment, high efficiency of dissolving scale. It can better remove insoluble scales and sediments such as barium strontium, polymer, gum, asphaltenes. It also doesn’t produce toxic and harmful gases such as H2S, and it’s safe and environmental protection.